Product Features
The PolyFLEX™ 50 / 50B tubing line is made in the U.S. from a semi-rigid low density polyethylene (LDPE) giving it a natural milky white color. This product line contains no plasticizers and very low levels of extractables. It maintains FDA approval and is the most chemically resistant product offered by Finger Lakes Extrusion. Although PolyFLEX™ 50 tubing is milky white, users are still able to determine if there is flow inside of the tubing. PolyFLEX™ 50B tubing is opaque black and inhibits algae growth and UV degradation making it a good choice for outdoor use.
PolyFLEX™ 50 Tubing - Natural
- Semi-rigid and translucent
- Low in extractables
- Offers a wide range of working temperatures
- Resistant to a broad range of chemicals
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
PolyFLEX™ 50 Tubing - Black
- Same formulation as PolyFLEX™ 50
- More resistant to UV radiation than natural tubing
- Does not promote algae growth
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
Typical Applications
PolyFLEX™ 50 - Natural
- Transfer of foods and beverages
- Instrumentation
- Chemical lines
- Light-sensitive media
- Color coding of processing lines
- Outdoor applications
Specifications
All PolyFLEX™ 50 / 50B tubing products offer the following:
This product meets the requirements for polyolefin resins intended for food packaging applications as described in the FDA olefin polymer regulation 21 CFR 177.1520(c)2.2. The resin may be used in contact with all types of food as defined in Table 1, 21 CFR 176.170(c) and at use conditions B-H as defined in Table 2, 21 CFR 176.170(c). This product is produced in accordance with good manufacturing practices (GMP) as outlined in 21 CFR 174.5.
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
Chemical Resistance
Ratings for ideal conditions 73°F / 25°C
Strong Mineral Acids
Excellent
Organic Acids
Good
Weak Acids
Excellent
Bases - Weak
Excellent
Bases - Strong
Good
Solvents
Good
Size Chart & Physical Properties
PolyFLEX™ 50
Size Chart
Catalog Number
ID
Size In.
OD
Size In.
Wall
Operating
Pressure
PSIG 73°F
PSIG 73°F
Case
Qty. Ft.
8750-4245
1/8
1/4
1/16
200
100
8750-4281
.170
1/4
.040
120
100
8750-8281
.170
1/4
0.040
120
500
8750-4335
1/4
3/8
1/16
120
100
8750-8335
1/4
3/8
1/16
120
500
8750-4430
3/8
1/2
1/16
86
100
8750-8430
3/8
1/2
1/16
86
500
8750-4505
1/2
5/8
1/16
66
100
8750-8505
1/2
5/8
1/16
66
500
8750-2605
3/4
1
1/8
80
50
Physical Properties
Properties
ASTM Method
Value Rating
Hardness; Shore A (+/-5)
D2240
50
Vacuum
Not Recommended
Operating temperature range
-100° - 175°F
-73° - 79°C
-73° - 79°C
Maximum Working Pressure
73°F / 120PSI
25°F / 60PSI
25°F / 60PSI
Testing Size
1/4"ID x 1/16"W
Color
Natural Translucent
Odor
Slight
Taste
None
Specific Gravity; g/cm³
D792
.92
Tensile Strength; psi
D638
1700
Ultimate Elongation; %
D638
600
Flame Resistance
D568
Slow Burn
PolyFLEX™ 50B
Size Chart
Catalog Number
ID
Size In.
OD
Size In.
Wall
Operating
Pressure
PSIG 73°F
PSIG 73°F
Case
Qty. Ft.
8752-4245
1/8
1/4
1/16
200
100
8725-4281
.170
1/4
.040
120
100
8752-4335
1/4
3/8
1/16
120
100
8752-4430
3/8
1/2
1/16
86
100
8752-4505
1/2
5/8
1/16
66
100
Physical Properties
Properties
ASTM Method
Value Rating
Hardness; Shore A (+/-5)
D2240
50
Vacuum
Not Recommended
Operating temperature range
-100° - 175°F
-73° - 79°C
-73° - 79°C
Maximum Working Pressure
73°F / 120PSI
125°F / 60PSI
125°F / 60PSI
Testing Size
1/4"ID x 1/16"W
Color
Black
Odor
Slight
Taste
None
Specific Gravity; g/cm³
D792
.92
Tensile Strength; psi
D638
1700
Ultimate Elongation; %
D638
600
Flame Resistance
D568
Slow Burn
* The above is accurate to the best of the Company’s knowledge, however, these are typical values and should not be used as a certification. All materials should be tested for suitability in their intended use.