FuelFLEX
Dura PolyFLEX
Product Features
The FuelFLEX™ 65 product line is made in America especially for use with petroleum based products. Its distinct translucent yellow color identifies it as a fuel line, but also allows the user to monitor flow. The special PVC formulation uses a specific plasticizer that will not crack or dry out like other PVC compounds will in the presence of petroleum based products. This formulation also boasts a higher resistance to ethanol and a longer shelf life than traditional fuel formulations.
FuelFLEX™ 65
For Use with Petroleum-Based products
- Flexible and easy to install
- Resists swelling and hardening
- Easy-to-identify transparent yellow
- Higher resistance to ethanol commonly found in many petroleum products
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
Typical Applications
- For use with petroleum-based products
- Fuel drain lines, vent tubes and overflow tubes
- Transfer of gasoline, heating oils, cutting compounds and coolants
- Lab handling of distillates
- NOT intended for use with foods or beverages
Specifications
All FuelFLEX™ 65 tubing products offer the following
- Flexible, premium-grade PVC product specifically formulated for intermittent use with petroleum-based products.
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
Chemical Resistance
Ratings for ideal conditions 73°F / 25°C
Strong Mineral Acids
Fair
Organic Acids
Fair
Weak Acids
Excellent
Bases - Weak
Excellent
Bases - Strong
Good
Solvents
Not Recommended
Size Chart & Physical Properties
Size Chart
Catalog Number
ID
Size In.
OD
Size In.
Wall
Pressure
Case
Qty. Ft.
8365-4190
5/64
9/64
1/32
42
100
8365-4230
3/32
3/16
3/64
54
10
8365-4245
1/8
1/4
1/16
62
100
8365-4295
3/16
5/16
1/16
48
100
8365-4335
1/4
3/8
1/16
40
100
8365-4390
5/16
7/16
1/16
36
100
8365-4430
3/8
1/2
1/16
30
100
8365-4440
3/8
5/8
1/8
44
100
8365-4463
7/16
9/16
1/16
24
100
8365-4465
7/16
5/8
3/32
40
100
8365-4505
1/2
5/8
1/16
22
100
8365-4515
1/2
3/4
1/8
40
100
8365-4570
5/8
7/8
1/8
34
100
8365-2605
3/4
1
1/8
30
50
Physical Properties
Properties
ASTM Method
Value Rating
Hardness; Shore A (+/-5)
D2240
65
Vacuum
Not Recommended
Operating temperature range
-15° - 165°F
-26° - 75°C
Maximum Working Pressure
73°F / 44psi
125°F / 22psi
Testing Size
1/4"ID x 1/16"W
Color
Transparent Yellow
Odor
Slight
Taste
N/A (Not Food Grade)
Specific Gravity; g/cm³
D792
1.24
Tensile Strength; psi
D638
2390
Ultimate Elongation; %
D638
415
Flame Resistance
D568
Self-extinguishing
* The above is accurate to the best of the Company’s knowledge, however, these are typical values and should not be used as a certification. All materials should be tested for suitability in their intended use.