Product Features
Raw milk tubing
- Smooth inner bore resists build up and facilitates cleaning
- Raw Milk Transport
Typical Applications
- Raw Milk Transport
- Distilled, deionized, demineralized or reverse osmosis-treated water
Specifications
All GLITEX® 218MS tubing products offer the following:
- Complies with the applicable FDA regulations for food contact as described in Title 21 (Food and Drugs) of the Code of Federal Regulations, or under separate Food Contact Notification (FCN). The applicable sections of 21 CFR/FCN are 175.300, 178.2010, 172.860, 178.3297, 1771, 1056, 1778 and 181.27
- Compliant with 3A requirements for milk transfer
- Meets REACH standards
- Meets ROHS standards
- Meets Proposition 65 standards
Ingredients & CRF Paragraph No.
| PVC Resin | 175.300 |
| Plasticizers FCN [1771, 1056, 1778] | 181.27 |
| Stabilizer | 178.2010 |
| Lubricants | 172.860 |
| Colorant | 178.3297 |
Chemical Resistance
Ratings for ideal conditions 73°F / 25°C
| Strong Bases | Fair |
|---|---|
| Weak Bases | Excellent |
Size Chart & Physical Properties
Size Chart
| Catalog Number | ID Size In. | OD Size In. | Wall | Case Qty. Ft. |
|---|---|---|---|---|
| 8510-4520 | 1/2 | 13/16 | 5/32 | 100 |
| 8510-4550 | 9/16 | 15/16 | 3/16 | 100 |
| 8510-8550 | 9/16 | 15/16 | 3/16 | 500 |
| 8510-4580 | 5/8 | 1 | 3/16 | 100 |
| 8510-8580 | 5/8 | 1 | 3/16 | 500 |
| 8510-4615 | 3/4 | 1-5/32 | 13/64 | 100 |
| 8510-2650 | 7/8 | 1-3/8 | 1/4 | 50 |
| 8510-2690 | 1 | 1-1/2 | 1/4 | 50 |
| 8510-2720 | 1-1/4 | 1-3/4 | 1/4 | 50 |
| 8510-2760 | 1-1/2 | 2-1/4 | 3/8 | 50 |
Physical Properties
| Properties | ASTM Method | Value Rating |
|---|---|---|
| Hardness; Shore A (+/-5) | D2240 | 69 |
| Vacuum | Not Recommended | |
| Operating temperature range | -10° – 175°F | |
| Specific Gravity; g/cm³ | D792 | 1.19 |
| Tensile Strength; psi | D2240 | 2000 |
| Ultimate Elongation; % | D638 | 400 |
| Flame Resistance | Self-ectinguishing | |
| Modulus 100%,psi (75mil) | D638 | 915 |
* The above is accurate to the best of the Company’s knowledge, however, these are typical values and should not be used as a certification. All materials should be tested for suitability in their intended use.