Product Features
The Ether-PUR FLEX™ 84 tubing line is made in the U.S. from an ether based polyurethane resin. This material is much more abrasion and impact resistant than PVC while maintaining flexibility and a glass-like clarity. Urethane also possesses a high level of chemical compatibility. Since this is a pure polyurethane resin, it contains no plasticizers and has a very low level of extractables making it a great product for high purity applications. This formulation CAN be used with aqueous solutions.
Ether-PUR FLEX™ 84
- Clear and Flexible
- Tough; resists tearing and abrasion
- Superior resistance to hydrolytic degradation compared to Ester-PUR FLEX™ 85
- Flexible at low temperatures
- High impact resistance
- Pure polyurethane; contains no plasticizers and low levels of extractables
- Resistant to atmospheric ozone
- Complies with FDA CFR21 for food packaging
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
- Made from NSF-61 certified compound
Typical Applications
- High-purity applications
- Ventilators
- Instrumentation
- Distilled, deionized, demineralized or reverse osmosis-treated water
- Handling petroleum- based products
- Recommended for use with aqueous solutions
- Pneumatics
Specifications
All Ether-PUR FLEX™ 84 tubing products offer the following:
- Complies with FDA food-contact regulations 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber Articles Intended for Repeated Use), subject to the limitations of and any other applicable regulations. In addition, this material is listed under NSF standard 61 for use in potable water applications.
- Meets RoHS and REACH standards, also does not contain any substances listed on Proposition 65
Chemical Resistance
Ratings for ideal conditions 73°F / 25°C
| Strong Mineral Acids | Fair |
|---|---|
| Organic Acids | Not Recommended |
| Weak Acids | Good |
| Bases – Weak | Good |
| Bases – Strong | Good |
| Solvents | Fair |
Size Chart & Physical Properties
Size Chart
| Catalog Number | ID Size In. | OD Size In. | Wall | Operating Pressure PSIG 73°F | Case Qty. Ft. |
|---|---|---|---|---|---|
| 8684-4170 | 1/16 | 1/8 | 1/32 | 90 | 100 |
| 8684-4240 | 1/8 | 3/16 | 1/32 | 58 | 100 |
| 8684-4245 | 1/8 | 1/4 | 1/16 | 92 | 100 |
| 8684-4290 | 3/16 | 1/4 | 1/32 | 48 | 100 |
| 8684-4295 | 3/16 | 5/16 | 1/16 | 72 | 100 |
| 8684-4330 | 1/4 | 5/16 | 1/32 | 48 | 100 |
| 8684-4335 | 1/4 | 3/8 | 1/16 | 76 | 100 |
| 8684-4340 | 1/4 | 7/16 | 3/32 | 80 | 100 |
| 8684-4345 | 1/4 | 1/2 | 1/8 | 92 | 100 |
| 8684-4390 | 5/16 | 7/16 | 1/16 | 56 | 100 |
| 8684-4400 | 5/16 | 9/16 | 1/8 | 84 | 100 |
| 8684-4430 | 3/8 | 1/2 | 1/16 | 48 | 100 |
| 8684-4435 | 3/8 | 9/16 | 3/32 | 65 | 100 |
| 8684-4440 | 3/8 | 5/8 | 1/8 | 76 | 100 |
| 8684-4465 | 7/16 | 5/8 | 3/32 | 56 | 100 |
| 8684-4505 | 1/2 | 5/8 | 1/16 | 34 | 100 |
| 8684-4515 | 1/2 | 3/4 | 1/8 | 64 | 100 |
| 8684-4565 | 5/8 | 13/16 | 3/32 | 44 | 100 |
| 8684-4570 | 5/8 | 7/8 | 1/8 | 50 | 100 |
| 8684-2605 | 3/4 | 1 | 1/8 | 48 | 50 |
| 8684-2640 | 7/8 | 1-1/8 | 1/8 | 38 | 50 |
| 8684-2675 | 1 | 1-1/4 | 1/8 | 34 | 50 |
Physical Properties
| Properties | ASTM Method | Value Rating |
|---|---|---|
| Hardness; Shore A (+/-5) | D2240 | 84 |
| Vacuum | Not Recommended | |
| Operating temperature range | -70° – 175°F -56° – 80°C | |
| Maximum Working Pressure | 73°F / 76PSI 125°F / 38PSI | |
| Testing Size | 1/4″ID x 1/16″W | |
| Color | Transparent Natural | |
| Odor | None | |
| Taste | N/A | |
| Specific Gravity; g/cm³ | D792 | 1.12 |
| Tensile Strength; psi | D638 | 5500 |
| Ultimate Elongation; % | D638 | 500 |
| Flame Resistance | D568 | Burns |
* The above is accurate to the best of the Company’s knowledge, however, these are typical values and should not be used as a certification. All materials should be tested for suitability in their intended use.